『E Ten hour Mass Flow Meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. What does the mass flow meter displays sen.asy. exceed # 387 mean?
This is an E+H 80/83 type mass flow meter, and the alarm description is a fault in the excitation coil of the measuring tube. The most likely faults that can trigger this alarm are power board failure and excitation coil failure. Specific judgment method:
1. Replace the power board of another instrument of the same model (as shown in Figure 3) with this instrument. If the alarm disappears, the original power board is faulty. If there is no problem with the power board, you can replace the three boards one by one to determine the problem. 2. For integrated instruments: power off the instrument, remove the display screen, remove the plastic cover (2), unplug the excitation coil plug (5.2), and measure the resistance between the inner core and the outer metal layer. This resistance is generally tens to hundreds of ohms depending on the diameter of the instrument. If it is open or short circuited, it indicates that the coil is damaged. Split type instrument: When the instrument is powered off, open the wiring chamber and remove wires 4
1 and 42 to directly measure the resistance. The conclusion is the same as above.
2. Please provide several brands of imported quality flow meters
Hello, KNKE, a well-known American manufacturer of imported quality flow meters, is pleased to answer your question.
. There are many imported quality flow meter brands, such as KNKE from the United States, YOKOGAWA from Japan, and VTON from the United States. This answer mainly recommends the American imported quality flow meter brand: KNKE, whose quality flow meter products have the following advantages:(1) High sensitivity: Therma
(4) Large range: The measurement lower limit is very low, and it can measure small flow rates of the imaginary ridge.
;(5) High integration: By combining MEMS technology, chips, channels, and signal processing circuits can be integrated together.
;(6) Simple structure: After packaging the structure on the silicon substrate, it is easy to install on the required equipment;
(7) Low cost: It can be mass-produced on silicon substrate by combining mature integrated circuit processes.
. If you think the answer is helpful to you, please kindly give a thumbs up to the American manufacturer of KNKE quality flow meters! The above is the answer to this question from KNKE, a manufacturer of imported quality flow meters from the United States. If you have a purchasing need for quality flow meters, please visit the official website of KNKE in the United States for selection and anti-seepage procurement, or inquire with KNKEs professional technical personnel to find the most suitable product for you.3. What are the top ten well-known brands of ultrasonic flow meters?
Based on current market and technological performance, the top ten well-known brands of ultrasonic flow meters are as follows.
1. International brand E+H (Endhaus): a German brand and leader in the automation industry, with it
Hot News
Related AD
