『Burkert flowmeter manual』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. Burkert flowmeter setting method
The setting method of BURKERT flowmeter is as follows: Understand the operating status: BURKERT electromagnetic flowmeter has two main operating states: automatic measurement state pure bending and parameter setting idle state. Automatic measurement state: When the instrument is powered on, it will automatically enter the automatic measurement state. In this state, the electromagnetic flowmeter will automatically complete various measurement functions and display corresponding measurement data. Entering parameter setting mode: To set parameters, first switch the flowmeter from automatic measurement mode to parameter setting mode. This is usually accomplished by operating the panel keys of the flowmeter, and the specific key operations may vary depending on the model, but generally require the use of four panel keys for navigation and selection. Use panel keys for parameter setting: In parameter setting mode, users can use four panel keys to browse and modify various parameters of the instrument. These parameters may include flow range, zero adjustment, full-scale adjustment, output signal type, etc. Users need to gradually set and adjust the parameters of the weighing pants according to their actual needs and the guidance in the instrument manual. Save settings and exit: After completing the parameter settings, you need to follow the steps in the manual to save the settings. Then, you can exit the parameter setting state and return to the automatic measurement state by operating the corresponding panel keys. Attention: Before setting parameters, please carefully read and understand the instrument manual to ensure correct and safe operation. Incorrect parameter settings may r
_600x400.jpg)
2. Burkert flowmeter setting method
The setting method of BURKERT flowmeter is as follows: Understand the operating status: BURKERT electromagnetic flowmeter has two main operating states: automatic measurement state and parameter setting state.
. Automatic measurement state: After the instrument is connected to the slag gauge, it will automatically enter the automatic measurement state. In this state, the electromagnetic flowmeter will automatically complete various measurement functions and display corresponding measurement data. Entering parameter setting mode: To set parameters, first switch the flowmeter from automatic measurement mode to parameter setting mode. This usually requires the use of the four buttons on the flowmeter panel for operation. Set parameters using panel keys: In parameter setting mode, users can use four panel keys to browse and modify various parameters of the flowmeter. Specific operations may include selecting parameter items, adjusting parameter values, and confirming settings. Attention: When setting parameters, please ensure that you have carefully read and understood the instructions of the flow sensor to avoid accidental operation. Proper use and setting can extend the service life of BURKERT flow meters. Through the above steps, you can set the necessary parameters for the BURKERT flowmeter to meet your measurement needs.3. What are the correct methods for using the German Burkert flowmeter?
The German BURKERT flowmeter is widely used in China, and correct use can prolong the service life of the BURKERT flowmeter. Charlotten Industrial Technology will e
Hot Blog
Related AD
