Current position > Product detail
『DN200 steam flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Can a DN200 caliber vortex flowmeter measure steam?
The DN200 vortex flowmeter refers to the diameter of the flowmeter, which also refers to the judgment of whether the pipeline diameter is large or small. The flow range of gas measured by the DN200 vortex flowmeter is between (0-5000) m3/h, and steam can be measured using the DN200 vortex flowmeter as long as it is within this measurement parameter range.
2. Swiss E+H Endershause Vortex Flow Meter F 200, 7F2C80, DN80 3 "Introduction
Swiss E+H Endershause Vortex Flow Meter F 200, 7F2C80, DN80 3" Introduction: Swiss E+H Endershause Vortex Flow Meter F 200, model 7F2C80, DN80 3 ", is a versatile flow meter specially equipped with wet steam detection function and has the highest measurement accuracy.
1. Application measurement principle: Especially suitable for measuring wet steam/saturated steam/superheated steam, gases and liquids (as well as low-temperature media).
. This flow meter has been optimized for steam measurement, with a suitable caliber range for wet steam measurement of DN 25... 300 (1... 12 "). Wide applicability: The pressure sensor can be installed flexibly, using industrial condenser tube pressure measurement, and the display module has data transmission function. Durable and sturdy: Equipped with a sturdy and durable dual chamber casing, it ensures stable operation in various harsh environments. High safety: Through multiple international certifications (SIL, MaLiangRuan Hazardous Area), the equipment can be safely used even in hazardous areas.2. Advantages: Easy energy management: Built in temperature and pressure measurements for steam and gas, making energy management convenient for users.
. Space saving_600x400.jpg)
III. Measurement Principle: This flowmeter is based on the Karman vortex street principle for measurement.
. When the fluid passes through the blocking body, vortices will alternately appear on both sides, and the rotation directions of the vortices on both sides are opposite. Each vortex generates a low-pressure zone, and sensors detect pressure changes and convert them into electrical pulse signals. Within the allowable range of the flowmeter, vortex rules are generated, so the vortex frequency is proportional to the volumetric flow rate. The calibration coefficient (K coefficient) is a proportionality constant, where K coefficient=pulse/volume unit (cubic meter). Within the allowable range of the flowmeter, the K coefficient depends only on the geometric structure of the flowmeter and is independent of the flow rate, properties, and type of the measured medium. 4. The sens