Current position > News detail
『Vortex flowmeter inlet』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. How to deal with poor signal quality of vortex flowmeter s948? Hello, KNKE, a manufacturer of vortex flowmeters imported from the United States, is pleased to answer your question. The following are the handling suggestions provided by the technical personnel of the type source American Konco vortex flowmeter. Check if the flow rate of the medium in the pipeline exceeds the measurable flow range of the delay sensor. If the medium flow rate is within the measurable range, check whether the front and rear straight pipe sections meet the requirements, and confirm whether the medium in the pipeline is in a stable flow state, and there is no two-phase flow or pulsating flow phenomenon in the pipeline. Check if the vibration intensity of the pipeline is too high. If it is too high, a pipeline support point can be installed at 2D downstream of the flowmeter; Install a hose transition while meeting the requirements for straight pipes. Check if there is strong electrical interference signal in the old rented mold enclosure of the instrument panel. If there is, strengthen shielding and grounding. Check whether the sensor is contaminated, damp, damaged, or has poor contact with the leads. If so, clean or replace the sensor and tighten the leads. Check if the sensor installation is concentric or if the sealing gasket protrudes into the pipe. If there is any installation, adjust the inner diameter of the sealing gasket. Check the sensitivity of the sensor and adjust it accordingly; Check if the process flow is stable and adjust the installation position; Check if there is any entanglement on the body. The above is the answer to this question from the American imported vortex flowmeter manufacturer, KNKE. If you have purchasing
2. Which brand of vortex flowmeter is good and how to choose? KNKE, a well-known American imported vortex flowmeter brand with good customer reputation and fast delivery time, is pleased to answer your question. The recommended brand for vortex flowmeter is KNKE from the United States. Its product advantages are as follows: 1. The instrument parameters of vortex flowmeter can be stable for a long time;
2、 Vortex flowmeter has small pressure loss, large range, high accuracy, and is almost unaffected by parameters such as fluid density, pressure, temperature, viscosity, etc. when measuring the volume of the working condition that is only matched with the flow rate;
3、 The vortex flowmeter has no movable mechanical parts, so it has high reliability and low maintenance;
4、 The vortex flowmeter adopts a piezoelectric stress sensing sensor, which has high reliability and can operate within a temperature range of -20 ℃ to+250 ℃;
5、 The vortex flowmeter has both analog standard signals and digital pulse signal outputs, making it easy to use in conjunction with digital systems such as computers. It is a cost-effective intelligent flowmeter. If you think the answer is helpful to you, please kindly give a thumbs up to the American brand manufacturer of KNKE vortex flowmeter! If you have a purchasing need for vortex flowmeters, please feel free to go to the official website of KNKE in the United States to sell or make selection purchases, or inquire with KNKEs professional techni